GRP Bathroom Repair Kit
In stock
Product Code
U66372
A simple to use and very effective kit of componentsdesigned to enable surface renovation of bathroom fittings. The materials will repair and hide cracks and blemishes in ceramic, china clay, acrylic, GRP and enamelled surfaces.
For Repairing Hairline Cracks
Ensure the surface you are going to work on is completely dry. The filler will penetrate a groove much more effectively than it will a hairline crack, so use the Rake and Spreader to widen cracks into a groove, which is about 3mm deep.
For Repairing Chips & Blemishes
Ensure the surface you are going to work on is completely dry. The filler will penetrate a deep blemish much more effectively than it will a thin surface abrasion, so roughen and if possible, slightly deepen the damaged surface of the area to be repaired.
1. Whichever repair method is used, the prepared area MUST be thoroughly cleaned and vacuumed to remove all loose material.
2. Carefully pierce the nozzle of the Catalyst/Activator container. Add all the contents to the container of Gelcoat and use the Spatula to thoroughly mix for about 15 seconds and without delay, spread the mix into the groove or blemish using the edge of the spreader. Leave to set for about 30 minutes.
3 Ensure that the Gelcoat has set hard and use the Sanding Strip, which has been thoroughly wetted, to smooth the surface.
4. Carefully pierce the nozzle of the Acetone container. Use the contents and one side of the Buffing Cloth to remove any unwanted Gelcoat in the repaired area.
5 Use the Dry side of the Buffing Cloth to apply the Polish and then buff the repaired area until a desired finish is achieved.
For Repairing Hairline Cracks
Ensure the surface you are going to work on is completely dry. The filler will penetrate a groove much more effectively than it will a hairline crack, so use the Rake and Spreader to widen cracks into a groove, which is about 3mm deep.
For Repairing Chips & Blemishes
Ensure the surface you are going to work on is completely dry. The filler will penetrate a deep blemish much more effectively than it will a thin surface abrasion, so roughen and if possible, slightly deepen the damaged surface of the area to be repaired.
1. Whichever repair method is used, the prepared area MUST be thoroughly cleaned and vacuumed to remove all loose material.
2. Carefully pierce the nozzle of the Catalyst/Activator container. Add all the contents to the container of Gelcoat and use the Spatula to thoroughly mix for about 15 seconds and without delay, spread the mix into the groove or blemish using the edge of the spreader. Leave to set for about 30 minutes.
3 Ensure that the Gelcoat has set hard and use the Sanding Strip, which has been thoroughly wetted, to smooth the surface.
4. Carefully pierce the nozzle of the Acetone container. Use the contents and one side of the Buffing Cloth to remove any unwanted Gelcoat in the repaired area.
5 Use the Dry side of the Buffing Cloth to apply the Polish and then buff the repaired area until a desired finish is achieved.
| Brand | Excel Industries |
|---|---|
| Manufacturer Part Code | EPGRP1 |
| Type | Repair Kit |
Collection:
- You can select the branch where you would like to collect your order.
- We will send you an email when your order is ready to be collected.
- Orders received by 3pm can be collected in the branch during opening hours on the next working day if all stock is available in the local branch
- If we need to transfer some of your products from our central warehouse to your local branch, it may take 2-3 days for your order to be ready for collection
- You must report any damages, shortages or incorrect items to the showroom where you collected your order within 48 hours of collection.
Delivery:
- There is a delivery charge of €35 for any order under €500
- You will be contacted by the branch to confirm you delivery details. We will also send you an email to confirm when your order has gone out for delivery.
- Orders received by 3pm can be sent out for delivery during opening hours on the next working day if all stock is available in the local branch and a delivery slot is available. If our normal delivery service schedule is full, you will be contacted by the branch to agree alternative delivery details.
- You must report any damages, shortages or incorrect items to Customer Support within 48 hours of delivery.
Please note you can cancel your order at any time until receipt – see our Returns & Cancellations policy for further information.
