EPS Integrated UV Disinfection Board (15 US gallon/minute)
In stock
Product Code
UA5381
The Integrated UV System by EPS is a plug & play disinfection solution. This system is designed to provide
high flow and low pressure drop, with a maximum flow rate 2.5 m3/hr.
Benefits
• No chemicals
• Cost effective
• Environmentally friendly
• Simple to maintain and service
• Easy lamp replacement
• Works on chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli, and viruses not visible to the naked eye
• Specially designed and tested Sterilume™-EX lamps provide consistent and reliable ultraviolet output over the entire life of the lamp (9000 hours) to ensure continuous purification.
• Durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation
• Controller visually displays the remaining lamp life and will go into alarm if the lamp fails.
• Monitored systems are equipped with a UV sensor which provides a continuous readout of UV intensity
• Controller with sealed case to prevent damage from accidental water intrusion and is fully CSA and CE compliant
• Monitored systems allow for the installation of an optional solenoid valve which will stop the flow of water through the chamber should the UV performance fall below a safe level
high flow and low pressure drop, with a maximum flow rate 2.5 m3/hr.
Benefits
• No chemicals
• Cost effective
• Environmentally friendly
• Simple to maintain and service
• Easy lamp replacement
• Works on chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli, and viruses not visible to the naked eye
• Specially designed and tested Sterilume™-EX lamps provide consistent and reliable ultraviolet output over the entire life of the lamp (9000 hours) to ensure continuous purification.
• Durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation
• Controller visually displays the remaining lamp life and will go into alarm if the lamp fails.
• Monitored systems are equipped with a UV sensor which provides a continuous readout of UV intensity
• Controller with sealed case to prevent damage from accidental water intrusion and is fully CSA and CE compliant
• Monitored systems allow for the installation of an optional solenoid valve which will stop the flow of water through the chamber should the UV performance fall below a safe level
| Brand | EPS |
|---|---|
| Manufacturer Part Code | 1079731 |
| Product Type | Water Softener |
| Flow Rate | 15 g/min |
| Connection Size | 1" |
Collection:
- You can select the branch where you would like to collect your order.
- We will send you an email when your order is ready to be collected.
- Orders received by 3pm can be collected in the branch during opening hours on the next working day if all stock is available in the local branch
- If we need to transfer some of your products from our central warehouse to your local branch, it may take 2-3 days for your order to be ready for collection
- You must report any damages, shortages or incorrect items to the showroom where you collected your order within 48 hours of collection.
Delivery:
- There is a delivery charge of €35 for any order under €500
- You will be contacted by the branch to confirm you delivery details. We will also send you an email to confirm when your order has gone out for delivery.
- Orders received by 3pm can be sent out for delivery during opening hours on the next working day if all stock is available in the local branch and a delivery slot is available. If our normal delivery service schedule is full, you will be contacted by the branch to agree alternative delivery details.
- You must report any damages, shortages or incorrect items to Customer Support within 48 hours of delivery.
Please note you can cancel your order at any time until receipt – see our Returns & Cancellations policy for further information.
