Sureflow Wall Mounted Water Boiler with Non-Drip Tap 2.5L (Mirror Finish)
In stock
Product Code
U46254
The Wall Mounted SureFlow range offers three wall mounted models with simple stainless steel cases providing a plentiful supply of boiling water. For customers who are working to a budget and want Instanta quality and reliability but with slightly lower specification.
Features and Benefits
● Introductory diagnostic system
● Three models available
● Large heavy duty non-drip taps
● Mirror finished stainless steel case
Installation
As per instruction manual supplied.
Plumbing
Designed for direct connection to a potable cold water supply using fittings supplied. An isolating valve should be installed between the supply and the heater. These wall mounted boilers have a rear connection and overflow and requires two bar incoming water pressure.
Electrical
To be connected to 230 volt 13 amp supply.
Construction
● Polished stainless steel case.
● Stainless steel heating chamber.
● Low voltage switching.
● Two safety cut outs.
Approvals
WRAS approved.
Features and Benefits
● Introductory diagnostic system
● Three models available
● Large heavy duty non-drip taps
● Mirror finished stainless steel case
Installation
As per instruction manual supplied.
Plumbing
Designed for direct connection to a potable cold water supply using fittings supplied. An isolating valve should be installed between the supply and the heater. These wall mounted boilers have a rear connection and overflow and requires two bar incoming water pressure.
Electrical
To be connected to 230 volt 13 amp supply.
Construction
● Polished stainless steel case.
● Stainless steel heating chamber.
● Low voltage switching.
● Two safety cut outs.
Approvals
WRAS approved.
| Colour | Chrome |
|---|---|
| Brand | Zip Water |
| Manufacturer Part Code | WA2N |
| Product Type | Water Heater |
| Range | Sureflow |
| Standards | wras |
| Capacity | 2.5 L |
| Height | 428 mm |
| Width | 254 mm |
| Warranty | 2 years |
Collection:
- You can select the branch where you would like to collect your order.
- We will send you an email when your order is ready to be collected.
- Orders received by 3pm can be collected in the branch during opening hours on the next working day if all stock is available in the local branch
- If we need to transfer some of your products from our central warehouse to your local branch, it may take 2-3 days for your order to be ready for collection
- You must report any damages, shortages or incorrect items to the showroom where you collected your order within 48 hours of collection.
Delivery:
- There is a delivery charge of €35 for any order under €500
- You will be contacted by the branch to confirm you delivery details. We will also send you an email to confirm when your order has gone out for delivery.
- Orders received by 3pm can be sent out for delivery during opening hours on the next working day if all stock is available in the local branch and a delivery slot is available. If our normal delivery service schedule is full, you will be contacted by the branch to agree alternative delivery details.
- You must report any damages, shortages or incorrect items to Customer Support within 48 hours of delivery.
Please note you can cancel your order at any time until receipt – see our Returns & Cancellations policy for further information.
